The horizontal bar vanity light brings the lighting and mirror into one horizontal composition. A pale polycarbonate shade runs along most of the dark stainless steel body, ending inside the rounded ends. Set along the lower face of the bar, the shade leaves the upper surface dark and draws the eye down toward the mirror and counter. The narrow dark edge frames the illuminated strip, so the fixture has a recognizable outline even when the light is off. That simple profile suits vanities where the mirror, fittings and wall finish already provide detail.
Two curved supports carry the bar forward from a rectangular wall plate. The plate is centered behind the bar and much shorter than the illuminated strip, giving the fixture a distinct center without adding a wide mounting block across the wall. The curved supports echo the rounded ends of the housing. Against straight cabinet edges and panel joints, those small curves soften the transition between the bar and the wall.
Above a rectangular mirror, the bar follows the upper edge of the glass and repeats the line of the counter below. A mirror with rounded ends brings a different balance. Its curved corners soften the outline of the vanity, while the straight bar keeps a horizontal line across the top. The dark body can also pick up dark taps or trim, tying the fixture to the rest of the vanity without depending on a matching mirror frame.
An overhead bar keeps the wall beside the mirror open for cabinet edges, decorative trim or a continuous wall finish. The centered plate gives an installer and designer a common reference when coordinating the fixture position with the mirror and the basin layout. That can be especially useful across guest bathrooms with repeated joinery and different mirror proportions. Where the design calls for a single line of light above the mirror, the horizontal bar vanity light carries the composition across the vanity.
Product Parameter
| Model | JSP-MB3301 |
| Product Type | Wall Lamp |
| Main Material | Stainless Steel |
| Light-transmitting material | Polycarbonate (PC) |
Start Your Custom Project
The horizontal bar vanity light can be specified alongside the mirror and vanity joinery in a guestroom or residential project. Its centered wall plate makes the mirror width and the wall space above the glass especially relevant to the fixture layout. Keeping the same bar profile across rooms can tie together different vanity finishes while allowing each mirror shape to remain distinct.
For a project quotation, the mirror size and required quantities by room type are useful starting points for discussing the horizontal bar vanity light.
Product application scenario


Product process details


Real factory scenes
Certifications & Documents

FAQ
Q: What are the body and shade made of?
Q: Where does the fixture sit relative to the mirror?
Hot Tags: horizontal bar vanity light, China horizontal bar vanity light factory, bathroom wall lamp, colored glass wall sconces, Elegant Gold Crystal Wall Sconce, International Modern Long Strip Glass Wall Light, Modern Nordic Style Linear Gold Sconce, Natural Stone Wall Sconce for Hotel













































