Stainless Steel Wall Trim Lines

Stainless Steel Wall Trim Lines
Product Introduction:
The stainless steel wall trim lines are slim metal profiles that sit in the joints between panels and along door and frame edges. They come in L and flat sections, mitred at the corners, in brushed steel or gold tone, so a run can disappear into a panel or read as a deliberate line across it.
Rating: 4.7
(3 ratings)
Send Inquiry
Add To Inquiry
Description
Technical Parameters

The stainless steel wall trim lines are specified where a joint has to be protected and seen at the same time. On a timber or laminate door leaf, a flat line set into a routed groove keeps the panel edges from wearing and gives the face a clear division; on a wall, an L-shaped section wraps the corner and hides the cut edge of the board behind it.

Profile size decides how the line reads. A narrow section gives a fine joint line, noticed mainly as a shadow gap; a wider section becomes a graphic element and is usually carried through a whole elevation at one width. The L-section adds a return leg, which is what makes it useful for corner protection and for the meeting of two wall finishes.

The finish controls the contrast. Brushed sections scatter light and stay close in tone to timber, stone and painted panels, so the line is felt rather than seen; gold-tone sections pick up warm interior light and can hold the composition of a door or a wall run.

At door frames the same profile is used for the reveal: a thin line set along the frame edge protects the plaster or panel return where hands and trolleys pass most often, and it keeps the door opening visually separate from the wall surface beside it.

On site the trim is set after the panels are fixed and before the final sealant, so the joint line belongs on the shop drawing and should be agreed with the panel installer. In a hotel guest room it usually runs with the door height, the wardrobe fronts and the wall panels, keeping the joints on one vertical rhythm.

Product Parameter

Model JSP-ST8148
Product Type Stainless Steel Products
Application Areas Hotel Guest Rooms, Door Surrounds, Wall Joints
Main Material Stainless Steel
Product Color Silver, Gold Tone
Surface Finish Brushed, Selective Mirror

Start Your Custom Project

The stainless steel wall trim lines can be adjusted within the following items, with the panel layout used to fix the section and the joints.

1. Section and length: profile shape, width and total length follow the panel joints and door heights.

2. Corners and ends: mitre angle, end treatment and return leg are agreed on the shop drawing.

3. Finish: brushed, mirror or gold tone can be assessed from a sample.

4. Panel interface: groove width and depth are set with the panel supplier before the trim is cut.

5. Installation sequence and fixing: the trim is fitted after panels and before sealant, and the fixing method follows the substrate.

6. Packing: profiles are packed straight in protective sleeves to avoid bending in transit.

7. Process: panel layout, section detail, then quotation and production.

Product application scenario

Metal trim lines set into a pair of timber doors running the full height
Lines Running through Door Height
Timber door with horizontal and vertical stainless steel trim lines forming a cross joint
Horizontal and Vertical Joints

Product process details

Close view of a trim section meeting a door panel with a fine joint and rounded edge
Fine Joint at the Trim Edge

Real factory scenes

Certifications & Documents

Certifications and documents

FAQ

Q: Is the door supplied with the trim?

Q: Are the corners welded or mitred?

Q: Which finish hides marks better?

 

Hot Tags: stainless steel wall trim lines, China stainless steel wall trim lines factory, Art Design Ceiling Stainless Steel Decorative Lines, brushed stainless steel ceiling, designer stainless steel ceiling trim, Modern hotel decoration lines, Stainless Steel Ceiling Decoration, stainless steel ceiling design for home

Send Inquiry