Open Grid Stainless Steel Display Partition

Open Grid Stainless Steel Display Partition
Product Introduction:
The open grid stainless steel display partition is a floor-standing screen of rectangular cells folded from brushed stainless plate, open on both faces. Nothing is glazed or backed, so it divides a room without closing the view, and objects placed inside are framed from either side.
Rating: 4.7
(9 ratings)
Send Inquiry
Add To Inquiry
Description
Technical Parameters

The open grid stainless steel display partition is closer to joinery than to a wall. Cells are set at several widths and heights, so the grid reads as a composition rather than uniform shelving. The outer frame is deeper than the internal plates, which gives the screen a visible edge and keeps the front face flat enough to sit against a lift lobby or a corridor line.

All faces are brushed, so the screen changes with the light rather than staying one tone: daylight makes the plates read pale, interior lighting pushes them toward bronze. That is why the same screen can sit in a bright lobby and a darker restaurant, and why handling marks show less than on a matte or polished finish.

Open cells mean the screen is used from both sides. In a restaurant it can hold menus, tableware or plants on the dining side while the circulation side stays clear; in a lobby it can frame a sculpture or a group of objects at eye height. Because the grid is open, air and sound pass more freely than through a solid partition.

A screen of this kind is planned with the floor and the ceiling in view. It stands on its own base, so the floor finish and any slope are checked first; where it runs up to a ceiling or a beam, the top gap belongs on the drawing, and the position is fixed after the floor finishes are complete.

Product Parameter

Model JSP-ST8168
Product Type Stainless Steel Products
Application Areas Hotel Lobbies, Restaurants, Clubs
Main Material Stainless Steel
Product Color Champagne Gold
Surface Finish Brushed

Start Your Custom Project

The open grid stainless steel display partition can be adjusted within the following items, with the plan and the floor condition used to set the run.

1. Run length, height and opening: the overall size and the position of the walk-through opening follow the plan.

2. Cell rhythm: cell widths and heights can be composed for the objects the screen will carry.

3. Plate thickness and structure: thickness and internal reinforcement are assessed against the span rather than fixed in advance.

4. Finish: brushed champagne is the standard; bronze tones and other finishes can be assessed from a sample.

5. Floor fixing: base type and anti-tilt fixing are agreed with the site condition before production.

6. Packing and transport: the run is divided into modules that can pass through lifts and doors.

7. Process: plan and elevation, module division, then quotation and production.

Product application scenario

Stainless steel open grid partition separating restaurant seating in a hotel dining room
Semi-Open Divider between Seating Groups
Open grid stainless steel screen enclosing a lobby booth with lounge chairs and a table
Lobby Booth Enclosure
Looking through stainless steel grid cells toward a restaurant dining area
View through the Grid

Product process details

Close-up of a stainless steel grid inner corner showing folded edges and brushed grain
Inner Corner Detail
Close side view of a stainless steel grid partition with offset rectangular cells
Plate Thickness and Offset Cells

Real factory scenes

Certifications & Documents

Certifications and documents

FAQ

Q: Is the screen open on both sides?

Q: Does it need fixing to the floor?

Q: Can it be supplied in sections?

 

Hot Tags: open grid stainless steel display partition, China open grid stainless steel display partition factory, creative steel display stand, designer metal display shelf, Fashion display stand, Metal grating display rack, minimalist retail rack, Stainless steel display stand

Send Inquiry