Side Slot Cylinder Wall Light

Side Slot Cylinder Wall Light
Product Introduction:
The side slot cylinder wall light is a plain metal tube in brushed champagne with one narrow slot running down its side. Light leaves the tube through that slot and spreads across the wall, while the body stays dark, so the fixture reads as a band of light rather than a visible bulb.
Rating: 4.7
(9 ratings)
Send Inquiry
Add To Inquiry
Description
Technical Parameters

The side slot cylinder wall light works by contrast: one line of light against a long closed tube. Because the slot runs parallel to the body rather than at the end, the wash is asymmetric and reaches further along the wall on the slotted side, leaving the ceiling and the floor comparatively free of glare.

The tube ends are rounded and the surface is brushed, so marks show far less than on a polished finish. Near the slot the metal edge is turned inward, which makes the opening read as a machined line rather than a cut gap; switched off, the fixture becomes a plain cylinder on the wall.

Two mounting positions are common: at shoulder height beside a door, where the wash runs down to the floor, or higher along a corridor, where the band continues from one fixture to the next. In a bedroom the same shape can sit beside a mirror or a wardrobe and keep the ceiling clear.

On a dark or textured wall the band reads as light on a surface; on a pale flat wall the same fixture draws a sharper edge. Both work, but the darker wall shows more of the wash and less of the body, which is often why the light is chosen for an entrance where the door itself is the focus of the space.

Repeated along a corridor, the fixtures are set out on fixed spacing so the bands read as a rhythm. The slot direction decides which way each wash falls, so the units must be oriented consistently, and that orientation belongs on the drawing rather than on site.

Product Parameter

Model JSP-MB3318
Product Type Wall Lamp
Application Areas Entrances, Corridors, Bedrooms
Main Material Metal
Product Color Champagne Gold
Surface Finish Brushed

Start Your Custom Project

The side slot cylinder wall light can be adjusted within the following items, with the door positions and wall joints used to set the run.

1. Body length and diameter: the tube length follows the height of the wall area it lights.

2. Slot direction and width: the slot can face either side, and its width is agreed with the lighting effect required.

3. Finish: brushed champagne is the standard; other finishes can be assessed from a sample.

4. Light source and electrical: power, colour temperature and voltage are confirmed per project rather than fixed in advance.

5. Mounting height and fixing: the fixing line and wall build-up are agreed before the run is set out.

6. Packing: tubes are packed individually with surface protection.

7. Process: elevation drawing, finish sample, then quotation and production.

Product application scenario

Champagne cylinder wall light above a console with a plant and a wall socket
Light above a Console and Plant
Champagne cylinder wall light beside an entrance door lighting a plant and console area
Wall Light beside an Entrance Door

Product process details

Close-up of the glowing lower opening of a cylinder wall light
Lit Bottom Opening

Real factory scenes

Certifications & Documents

Certifications and documents

FAQ

Q: Which way does the light fall?

Q: Is the lamp visible?

Q: Can the fixture be mounted at different heights?

 

Hot Tags: side slot cylinder wall light, China side slot cylinder wall light factory, gold and crystal sconces, LED Minimalist Strip Wall Lamp, Linear LED Wall Lamp Minimalist Decorative LED Light, Luxury Hotel Corridor With Curated Design, New Light Luxury Corridor Lights, Square Marble LED Wall Light for Restaurant

Send Inquiry